How To Get Ready For Kitchen Cabinet Installation

If you are about to install your new kitchen cabinets, you will need some tips. Whether you are looking for information to help you choose suitable cabinets or you want to know how to prepare for the installation, this article will provide you with a few valuable tips.

Install Upper Cabinets Before Lower Cabinets

If you are considering installing upper cabinets before lower cabinets, there are a few things to consider. The most important is that both units must be level. This is especially true if they are to be hung from the same stud.

Using a stud finder is a good idea. You can also use a laser level to determine the height of the walls. Once you have selected the size, you should be able to set the cabinets on their respective studs.

Once you have established the height of the studs, you can use a jack to lift the cabinets onto the wall. While lifting them, you should consider the shape of your kitchen. Some types of kitchen cabinets have a high weight capacity, and many can become challenging to raise. It is also a good idea to check for bumps on the wall before you begin. This can be an arduous process so if you are unsure in your abilities it may be a good idea to hire a professional in kitchen cabinet installation in Phoenix to make sure the job is done correctly.

Mark The Reference Lines On The Wall

When installing kitchen cabinets, it’s essential to mark the reference lines on the wall. The layout line will help you locate the wall studs and ensure the cabinets are plumb.

It’s a good idea to use a level when marking the reference lines on the wall. This will help you draw a layout line on the wall and make the cabinet installation smoother.

Measure the size of the kitchen area and determine how tall the cabinets will be. Base cabinets should be flush with each other, and the top of the cabinet should be level with the floor. The upper cabinets should be a few inches higher than the base cabinets.

The high point of the reference line on the wall should be at least 17 to 18 inches above the base cabinet. This can be accomplished by using a 4-foot level. If the floor is uneven, it may be necessary to shim the level to get a more accurate measurement.

Drill 1/4″ Holes For #10 Wall Anchors

There are many types of wall anchors available on the market. The type of anchor you choose depends on the weight of the load you plan to hang and the material of your wall. Choosing the right one is often tricky.

Hollow-wall anchors are ideal for hanging cabinets, bathroom accessories, and flat-panel TVs. They are strong and will resist vibration. These anchors can hold up to two times more than wing toggles.

Plastic hollow-wall plug anchors are easy to install with a drill or hammer. They expand and lock into place when the screw is tightened. This makes them ideal for hanging lightweight items.

There are also self-drilling and self-tapping anchors, which provide a secure hold. Self-drilling anchors are best for medium-duty applications. You’ll need a drill and a Phillips head screwdriver to use them.

Install The Doors & Toe-Kick

Before installing the doors and toe-kick on kitchen cabinets, it’s a good idea to measure the area where the cabinets will be installed. You’ll also need to note where the electrical, plumbing and drain lines are and where any appliances, such as a dishwasher, are located. This will make the installation process much simpler.

If you have an uneven floor, you may need to narrow the toe-kick to get it to fit. Also, you’ll want to level the floor before putting the cabinets on it. To do this, use a stud finder to locate studs on the wall. Then mark a stud on the back of the first cabinet.

Next, place your base cabinets on the wall. Check to make sure they are square and flush with each other. If they are not, you’ll need to shim them. Shims will help keep the cabinets level while you install them.

Mount Cabinets Against The Ceiling

Before installing kitchen cabinets, ensure you know how to mount them properly. For example, you can use screws to hold the front of the cabinet to the ceiling. However, drilling into the wood is the best support for heavy cabinets.

First, locate the studs on your wall. You can do this with the help of a stud finder. Then, mark them with painter’s tape.

Once you have identified the studs, you can install your base cabinets. To do this, you must make sure they are level. After that, you can attach them to the wall. Use a 3-inch #10 screw for this. Wait to tighten it until all of your cabinets are in place.

Next, you should measure the height of your upper cabinet. This is usually about 8 feet. Depending on the width of your cabinets, you can decide to install them on top of your ceiling or in a row.